← All articles

Guide

How to run a truck cycle time study

Published 2026-11-11 · CycleStudy Pro

A truck can lose more time waiting at the face than it spends driving. The only way to see it is to time each step of the truck's visit to the loading point, truck by truck. Here is a method that works from a safe spot beside the face.

1. Define the steps before you time anything

Agree on the start and stop of each step so every observer cuts the visit in the same place.

StepStarts whenStops when
QueueTruck arrives and has to waitTruck is called into the spot
Truck in spotTruck starts to reverse inTruck is in the spotting position
Truck in positionTruck stops, ready to loadLoader is ready to dump
Loading (passes)First bucket over the bodyFinal pass discharged
Truck exitFinal pass is doneTruck pulls away

Total time at the loading point is the sum of these steps. Anything beyond that, such as a stop on the haul road, is a delay and should be tagged as one.

2. Choose a safe observation spot

Stand where you can see the truck, the spot and the loader at the same time, outside the swing radius and the haul road, and follow the site's safety rules. Never trade a safe position for a better view.

3. Record the delays as they happen

Do not discard slow visits. Tag them: no loader available, wrong spot, dispatch hold, a blast hold, a haul delay. You can then report the clean loading time and the waiting time separately, which is the only fair way to compare trucks and crews.

4. Know how many trucks you need

The sample size depends on how variable the visits are, using the same formula as for a loader study.

n = ( t × s / ( r × x̄ ) )²

where s is the standard deviation of your sample, x̄ the mean, r the accuracy you accept (0.05 is 5%) and t about 2 for 95% confidence. Time trucks across shifts and haul distances, not only the quiet hour.

5. Common mistakes

6. Turn the numbers into action

Compare queue time with spot time and loading time. A long queue points to too many trucks for the loader, a long spot time points to a cramped or badly marked loading point, and a long loading time points to the loader or the dig. Pair this with the match factor and the queue time, and time the loader with the loader cycle guide.

Time your own trucks. CycleStudy Pro records loader and truck cycles offline and does this maths for you. Join the waitlist or try the free calculators.